Outdoor LED Display Structure Guide

Written & reviewed by Steven — Senior LED Display Engineer at DDW, 14 years of experience in LED screen design, installation and technical support.

Published: 6月 19, 2026

Quick answer: An outdoor LED display structure is usually a hot-dip galvanized steel frame designed for local wind load, the screen weight and maintenance access. It should include a service walkway (about 0.8 m) for rear-service screens, ventilation or air conditioning, lightning protection and proper grounding.

屋外設置のLED構造物は、以下の環境に長期にわたってさらされても耐えられなければなりません:

  • 日光
  • 雨
  • 風
  • 湿度
  • ほこり
  • 温度変動

このため、屋外での工事は屋内での設置に比べて、はるかに困難を極めます。.

Outdoor LED display structure checklist: wind load, corrosion protection, maintenance access, ventilation, lightning protection and drainage

屋外構造物に工学的な計算が必要な理由

大型の屋外ディスプレイは、構造的に大きな負荷をもたらします。.

業務上のプロジェクトでは、通常、以下の分析が必要となります:

  • 風荷重
  • 構造応力
  • 地盤の安定性
  • cabinet 重量
  • 設置角度

特に:

  • 沿岸地域
  • 強風環境
  • 中東のプロジェクト

構造工学が極めて重要になる。.

なぜ換気が軽視されがちなのか

多くの屋外工事では、防水に重点を置きすぎて、換気を軽視しがちです。.

空気の流れが悪いと、以下の事態が早まる可能性があります:

これは特に以下の点において極めて重要です:

  • 高輝度看板
  • 囲いのある構造物

長時間稼働システム

Outdoor LED Structure Design Checklist

  1. Get wind load and foundation calculations from a local structural engineer.
  2. Use hot-dip galvanized or properly painted steel to resist corrosion.
  3. Include a rear maintenance walkway or choose front-service cabinets.
  4. Plan ventilation, fans or air conditioning for enclosed structures.
  5. Install lightning protection and ground the structure (typically ≤ 4 Ω).
  6. Seal cable entries and add drainage to keep water out.

DDW Engineer Notes: Outdoor LED display structure

屋外用LEDの設計は、決してディスプレイ本体だけにとどまるものではありません。.

長期的な信頼性は、主に以下の要因に大きく左右されます:

  • 構造設計
  • 換気計画
  • 排水システム
  • 保守・メンテナンスの利便性

屋外での不具合の多くは、実際には表示上の問題というよりは、設計上の問題によるものです。.

FAQ

What steel is used for outdoor LED display structures?

Most outdoor LED structures use hot-dip galvanized carbon steel sized by a structural engineer for local wind and snow loads.

Does an outdoor LED screen need air conditioning?

Large enclosed outdoor LED displays in hot climates often need fans or air conditioning to keep internal temperatures safe.

How is an outdoor LED billboard protected from lightning?

With a lightning rod or air terminal, surge protectors on power and signal lines, and a low-resistance grounding system.

Related LED Display Guides

DDW製品で問題が発生した場合は、エンジニアが技術会議を調整し、問題のトラブルシューティングと解決を支援します。.

Need a quote or technical help? Talk to our engineers.

ショッピングカート 閉じる