Ground Support LED Screen Installation

Written & reviewed by Steven — Senior LED Display Engineer at DDW, 14 years of experience in LED screen design, installation and technical support.

Published: 6月 16, 2026

Quick answer: Ground support installation stacks LED cabinets from the floor using a base frame, truss towers or support bars, instead of hanging them. It is used when the venue cannot carry rigging loads. Stability depends on a level base, rear bracing, ballast and — outdoors — wind straps rated for local conditions.

地上支援用LEDシステムは、一般的に以下の用途で使用されています:

  • outdoor コンサート
  • スポーツイベント
  • 仮設ステージ
  • 公的な祭り
  • 屋外での式

吊り下げ式システムと比較して、地上支持構造では通常、以下の点を優先します:

  • 大画面表示
  • 空気抵抗
  • 構造的安定性
Ground support LED screen installation –

屋外での風荷重がなぜそれほど重要なのか

大型の屋外用LEDウォールは、以下のような要因から絶えず環境的な負荷にさらされています:

  • 風
  • 振動
  • 天候の変化
  • 観客の動き

構造設計に不備があると、深刻な安全上のリスクが生じるおそれがあります。.

そのため、プロ仕様の地上支援システムには以下が必要となります:

  • 構造計算
  • 強化された支持システム
  • 適切なバラスト
  • 安定した土台工事

大画面にはなぜより強固な構造補強が必要なのか

画面サイズが大きくなるにつれて、構造上の応力は劇的に増加する。.

これは特に、以下の点において極めて重要となります:

  • 野外フェスティバル
  • スタジアムイベント
  • 音楽コンサート
  • 政府主催の祝賀行事

大型のLEDウォールには、多くの場合、以下のものが必要となります:

  • steel reinforcement
  • 多点支持
  • 耐風解析
Ground support LED screen installation – Why Large Screens Require More Structural Reinforcement

Ground Support Setup Steps

  1. Level the base plates or ground frame on firm, flat ground.
  2. Erect rear truss towers or support bars to the required height.
  3. Stack cabinets from the bottom row upward, locking each connection.
  4. Add rear braces and ballast according to screen height and wind exposure.
  5. Outdoors, use wind straps and plan to power down and lower the screen in strong wind.
  6. Check verticality and flatness before connecting power and signal.

DDW Engineer Notes: Ground support LED screen installation

屋外ステージのプロジェクトでは、画面の解像度よりも耐風性が重要となる場合が多い。.

多くの構造上のリスクは、通常の気象条件下では現れず、急激な環境変化の際に生じる。.

地上支援工学においては、視覚的なスケールよりも常に安全性を優先すべきである。.

FAQ

When should I choose ground support instead of hanging?

Choose ground support when the venue roof or truss cannot carry the LED screen weight, or for outdoor stages without rigging points.

How high can a ground-stacked LED screen be?

Many ground support systems reach about 5–8 m, depending on bracing, ballast and wind load. Taller screens usually need a truss structure.

Is ground support safe outdoors?

Yes, when properly braced, ballasted and wind-strapped. Always follow the wind limits and lower or secure the screen in strong wind.

Related LED Display Guides

Need a quote or technical help? Talk to our engineers.

ショッピングカート 閉じる