Ground Support LED Screen Installation

Written & reviewed by Steven — Senior LED Display Engineer at DDW, 14 years of experience in LED screen design, installation and technical support.

Published: 6월 16, 2026

Quick answer: Ground support installation stacks LED cabinets from the floor using a base frame, truss towers or support bars, instead of hanging them. It is used when the venue cannot carry rigging loads. Stability depends on a level base, rear bracing, ballast and — outdoors — wind straps rated for local conditions.

지상 지원용 LED 시스템은 주로 다음과 같은 분야에서 사용됩니다:

  • 야외 concerts
  • 스포츠 행사
  • 임시 무대
  • 공공 축제
  • 야외 결혼식

매달기 방식과 비교했을 때, 지상 지지 구조물은 대개 다음 사항을 우선시합니다:

  • 대형 화면 비율
  • 바람 저항
  • 구조적 안정성
Ground support LED screen installation –

야외 풍하중이 왜 그토록 중요한가

대형 실외 LED 벽면은 다음과 같은 요인들로 인해 지속적인 환경적 압박에 직면해 있습니다:

  • 바람
  • 진동
  • 날씨 변화
  • 관객의 이동

부적절한 구조 설계는 심각한 안전 위험을 초래할 수 있습니다.

이것이 바로 전문 지상 지원 시스템에 다음 사항이 필요한 이유입니다:

  • 구조 해석
  • 강화된 지원 시스템
  • 적절한 밸러스트
  • 견고한 기초 시공

대형 스크린에 더 많은 구조적 보강이 필요한 이유

화면 크기가 커질수록 구조적 하중이 급격히 증가합니다.

이는 특히 다음의 경우에 매우 중요합니다:

  • 야외 축제
  • 경기장 행사
  • 음악 콘서트
  • 정부의 기념행사

대형 LED 벽면에는 대개 다음이 필요합니다:

  • steel reinforcement
  • 다점 지지
  • 바람 저항 분석
Ground support LED screen installation – Why Large Screens Require More Structural Reinforcement

Ground Support Setup Steps

  1. Level the base plates or ground frame on firm, flat ground.
  2. Erect rear truss towers or support bars to the required height.
  3. Stack cabinets from the bottom row upward, locking each connection.
  4. Add rear braces and ballast according to screen height and wind exposure.
  5. Outdoors, use wind straps and plan to power down and lower the screen in strong wind.
  6. Check verticality and flatness before connecting power and signal.

DDW Engineer Notes: Ground support LED screen installation

야외 무대 프로젝트에서는 화면 해상도보다 내풍성이 더 중요한 경우가 많습니다.

많은 구조적 위험은 평상시의 기상 조건에서는 나타나지 않고, 갑작스러운 환경 변화 시에 발생합니다.

지상 지원 공학에서는 시각적 규모보다 항상 안전을 최우선으로 삼아야 한다.

FAQ

When should I choose ground support instead of hanging?

Choose ground support when the venue roof or truss cannot carry the LED screen weight, or for outdoor stages without rigging points.

How high can a ground-stacked LED screen be?

Many ground support systems reach about 5–8 m, depending on bracing, ballast and wind load. Taller screens usually need a truss structure.

Is ground support safe outdoors?

Yes, when properly braced, ballasted and wind-strapped. Always follow the wind limits and lower or secure the screen in strong wind.

Related LED Display Guides

Need a quote or technical help? Talk to our engineers.

장바구니 닫기