LED Receiving Card Guide

Written & reviewed by Steven — Senior LED Display Engineer at DDW, 14 years of experience in LED screen design, installation and technical support.

Published: 8月 4, 2026

Quick answer: An LED receiving card sits in each cabinet, receives video data from the sending card over network cable, and drives the LED modules in that cabinet. Key specs are pixel loading capacity, number of data groups, supported driver ICs, grayscale and refresh performance, calibration data storage and monitoring or redundancy features.

受領カード

受信カードは、受信した画像データを処理し、LEDモジュールに配信します。.

通常、どのLEDキャビネットにも、少なくとも1枚の受信カードが搭載されています。.

LED receiving card – Receiving Card

「お礼状」がなぜそれほど重要なのか

カードの受け取りは、以下の項目に直接影響します:

  • グレースケール性能
  • リフレッシュレート
  • 色の均一性
  • signal synchronization

些細な設定ミスであっても、次のような問題を引き起こす可能性があります:

  • 異常な色
  • 画像の乱れ
  • ちらつき
  • マッピングに関する問題

ファインピッチシステムに優れた受信性能が求められる理由

次のような用途では:

  • XR制作
  • 放送スタジオ
  • コマンドセンター
  • 高級会議室

受信カードの性能が、はるかに重要になってきます。.

これは、ファインピッチディスプレイには以下の要件が求められるためです:

  • 高度なデータ処理
  • 低遅延
  • 安定した同期
  • グレースケールの制御性が向上
LED receiving card – Why Fine-Pitch Systems Require Better Receiving Performance

バックアップシステムが重要な理由

大規模なプロジェクトでは、しばしば以下のものが使用されます:

  • dual receiving card backup
  • 冗長な信号ループ
  • フェイルセーフアーキテクチャ

特に以下の分野において:

  • スタジアム用システム
  • 政府の指揮センター
  • 交通管制室

DDW Engineer Notes: LED receiving card

トラブルシューティングの試みの多くは、すぐにモジュールの交換に焦点を当てがちです。.

しかし、多くの場合、表示異常の真の原因は、信号のマッピングや受信カードの設定に関する問題にあります。.

Key Receiving Card Specifications

SpecificationWhat It Means
Pixel loadingMax pixels per card (must cover the cabinet)
Data groupsNumber of module data outputs
Driver IC supportCompatibility with high-refresh ICs
Grayscale / refreshImage smoothness and camera performance
Calibration storageKeeps point-by-point correction data
Monitoring / backupStatus feedback and dual-card options

FAQ

What does a receiving card do in an LED screen?

It receives data from the sending card and drives the LED modules in its cabinet with correct timing, grayscale and calibration.

Can receiving cards from different brands be mixed?

Generally no; receiving cards must match the sending card or processor system.

What happens when a receiving card fails?

The cabinet or area it controls usually goes black or shows errors until the card is replaced and configured.

Related LED Display Guides

Need a quote or technical help? Talk to our engineers.

ショッピングカート 閉じる