LED Sending Card Guide

Written & reviewed by Steven — Senior LED Display Engineer at DDW, 14 years of experience in LED screen design, installation and technical support.

Published: 8月 2, 2026

Quick answer: An LED sending card converts the video signal from a PC or source into LED data and sends it over network ports to the receiving cards. Each 1 Gbps port drives roughly 650,000 pixels; large screens need multiple ports or processors, with fiber for long distances and backup loops for reliability.

カードの送付

Colorlight is another major LED control system platform widely used in:

  • 商業用LEDプロジェクト
  • 屋外広告
  • 会議システム
  • 交通ディスプレイ
  • コマンドセンター
LED sending card – Sending Card

カードを送るということ
実際にやってみる

カード送信処理:

  • 信号変換
  • 画像送信
  • 同期制御
  • communication with receiving cards

カードの設定送信が不安定になった場合、ディスプレイに次のような現象が発生する可能性があります:

  • 画像のティアリング
  • 黒い画面
  • 同期の問題

リフレッシュ動作の異常

大規模プロジェクトに高度な送信システムが必要な理由

大規模なLEDシステムには、多くの場合、次のような要素が含まれます:

  • 複数のプロセッサ
  • 光ファイバー伝送
  • バックアップアーキテクチャ
  • 同期再生

これは特に次のような場合に多く見られます:

  • スタジアムのディスプレイ
  • XRステージ
  • 放送制作
  • 大規模なコンサート

冗長性が重要な理由

ハイエンドなプロジェクトでは、次のようなものがますます多く採用されています:

  • デュアルバックアップ送信カード
  • 冗長な信号経路
  • フェイルオーバーシステム

これにより、重要な運用中にシステム全体が停止することを防ぐことができます。.

DDW Engineer Notes: LED sending card

ライブイベント中に発生するディスプレイの不具合の多くは、LEDモジュールそのものが原因ではありません。.

一時的なシステム中断の背後にある真の原因は、多くの場合、シグナルアーキテクチャの不安定性にある。.

ミッションクリティカルな環境においては、プロフェッショナルなシステムの冗長性が極めて重要となります。.

Sending Card Capacity and Setup

ItemTypical Value / Guidance
Per 1G portAbout 650,000 pixels (60 Hz, standard bit depth)
CableCat5e/Cat6 up to about 100 m; fiber beyond
InputsDVI/HDMI from PC or source
RedundancyBackup loop and hot-standby cards
When to upgradeMultiple inputs or scaling → video processor

FAQ

How many pixels can a sending card drive?

It depends on the number of ports; each 1 Gbps port typically drives about 650,000 pixels.

What is the difference between a sending card and a video processor?

A sending card only converts and sends data; a video processor adds scaling, input switching and multi-window features, often with built-in sending ports.

Can a sending card send signal over long distances?

Yes, using fiber converters or fiber-output controllers for runs beyond about 100 m.

Related LED Display Guides

Need a quote or technical help? Talk to our engineers.

ショッピングカート 閉じる