LED Display Dead Pixels: Causes & Repair

Written & reviewed by Steven — Senior LED Display Engineer at DDW, 14 years of experience in LED screen design, installation and technical support.

Published: 6月 26, 2026

Quick answer: Dead pixels on LED displays are LEDs that stay off, stay on or show the wrong color. They are caused by physical impact, moisture, heat, poor soldering or driver IC faults. Single pixels can be repaired or the module replaced; COB and GOB technologies greatly reduce dead pixels in rental and fine-pitch screens.

ドット抜けは、LEDディスプレイプロジェクトにおいて最もよく見られる懸念事項の一つであり、特に以下の場面で顕著です:

  • 高密度配置の会議室
  • XRバーチャルプロダクション
  • 放送スタジオ
  • 高級小売店の店舗環境
  • コマンドセンター

至近距離で表示する場合、たとえ少数のドット抜けであっても、視覚的に目立つことがあります。.

LED display dead pixels –

ドット抜けの実際の原因とは

多くのお客様は、ドット抜けの原因がLEDの不良だけだと考えがちです。.

実際には、ドット抜けの問題は次のような原因で発生する可能性があります:

  • LEDランプの故障
  • ドライバICの問題
  • はんだ付けの不安定さ
  • 衝撃による損傷
  • 水分 corrosion
  • 過熱
  • 輸送時の振動

This is why the root cause should always be analyzed before replacing modules.

賃貸物件ではなぜデッドピクセルが多く発生しがちなのか

レンタル用LEDシステムでは、次のような問題が絶えず発生しています:

  • 交通
  • 振動
  • 再インストール
  • 衝突のリスク

これにより、固定設置の場合に比べてはるかに大きな物理的負荷がかかります。.

そのため、レンタルシステムでは次のようなものがますます多く採用されるようになっています:

  • GOB保護
  • 補強モジュール
  • 衝突防止キャビネットの設計

DDW Engineer Notes: LED display dead pixels

ドット抜けの問題の多くは、製造上の欠陥によるものではありません。.

不適切な輸送、過熱、湿気への曝露、および不適切な設置作業が、長期にわたる画素不良の真の原因となっていることがよくあります。.

高級プロジェクトにおいては、通常、予防保全の方が、繰り返される緊急修理よりも効果的です。.

Dead Pixel Types and Fixes

SymptomLikely CauseWhat to Do
Single dark pixelLED damaged by impact or moistureRepair LED or replace module
Whole row or column darkDriver IC or data line faultReplace module
Pixel always onShort circuitReplace LED or module
Many dead pixels after storageMoisturePreheat gradually; improve storage

FAQ

How many dead pixels are acceptable on an LED display?

Industry standards typically allow a very small rate (often around 1 in 10,000 or less), but quality screens aim for zero visible dead pixels.

Can dead pixels on an LED screen be repaired?

Yes. Technicians can replace individual LEDs on SMD modules or swap the whole module.

How do I prevent dead pixels?

Handle modules carefully, control humidity, preheat after storage and consider COB or GOB for high-risk applications.

Related LED Display Guides

Need a quote or technical help? Talk to our engineers.

ショッピングカート 閉じる